4000 Watt Solar Generator | SOLGEN 40S

$4,250.00

4000 Watt Solar Generator with 4800 Wh 24V Storage & 600 W Solar Array

Product Description

4000 Watt Solar Generator | SOLGEN 40S – 4000 Watt Split Phase Solar Generator

The 4000 Watt Solar Generator uses a Pure Sine Wave inverter rated for a 4000 watt Continuous output and 12000 watt Peak output.  With a 4800 Wh (watt hour) 12 Volt Battery Storage & (4) 150 Watt Solar Panels, this is a capable, powerful system which is ideal for off-grid, mobile and emergency backup power.

The most popular feature of this generator is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with startup surges, such as a refrigerators, freezers, microwaves and blow dryers.

Connects Directly To Your Breaker Panel to Provide Power To Your Household 120v outlets… or it can also be used as a stand alone system.

This Pure Sine Wave Solar Power Generator does not feed power back to the grid and does not shut off during a power outage like normal “grid tied” solar systems.


The SOLGEN 40S – 4000 Watt Solar Generator Includes:

  • 12,000 Watt Peak/4000 Watt Continuous Pure Sine Wave Inverter
  • (4) 100Ah (4800 Wh total) sealed lead acid AGM Solar Batteries
  • (4) 150 Watt Solar Panels for quick charging
  • 40 Amp MPPT Charge Controller with LCD display
  • 30 feet of MC4 solar panel wire and all cabling 

Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 220/230/240 volts of alternating current. The inverter accepts 24 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system.

The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air.  Additionally, the generator has a Power Saver mode that reduces power consumption until an actual load is detected.

A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance.

This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more.  Homes powering an entire breaker panel or tools with higher startup surges like air compressors may benefit from the larger inverter in the SOLGEN 60S .

This 4000 watt Solar Generator produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment.

Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the generator hooked up to grid power, it will detect the loss of electricity and start pulling energy from the battery bank instead to keep the power supply constant.

 

Additional Batteries and Panels Can Be Added Depending On Your Energy Requirements.   Also, consider adding a Transfer Switch to use your generator full time for reducing your total energy need.

4000 Watt Pure Sine Wave Inverter

Inverter Output Specifications:

  • Continuous Output Power: 4000 Watts
  • Surge Rating: 12000 Watts (20 Seconds)
  • Output 100-110-120-220-230-240Vac
  • Output breaker: 50 Amps
  • Nominal efficiency: >88% (Peak)
  • Line mode efficiency: >95%
  • Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC

Inverter Input Specifications

  • Nominal Input Voltage: 24.0Vdc
  • Minimum Start Voltage: 20.0Vdc
  • Low Battery Alarm: 21.0Vdc-22.0Vdc
  • Low battery Trip: 20.0Vdc-21Vdc
  • High Voltage Alarm: 32.0Vdc
  • Low battery Voltage Restart: 31.0Vdc
  • Idle Consumption: 52.5 Watts
  • Power Saver Mode Idle Consumption: <25 Watts

Inverter Charger Specifications

  • Output voltage: Depends on battery Type
  • Charger Rate: 55A
  • Over Charge Protection Shutdown 31.4V
  • Selectable Charge setting based on battery type
  • Adjustable charge current off-15%-100%
  • Four Stage Smart Charger

Inverter Transfer Switch Specifications

  • 50 amp automatic transfer switch
  • 10 ms (max)

Inverter Dimensions

  • Unit Weight: 84 lbs.
  • Unit Size L x W x H: 23.5 x 8.74 x 7.10 inches
  • Shipping Weight: 88 lbs.
  • Shipping L x W x H 30.5 x 14.5 x 13.75 inches

Mono-Crystalline Solar Panels

  • Maximum Power: 150W
  • Optimum Operating Voltage (Vmp): 17.9V
  • Optimum Operating Current (Imp): 8.38V
  • Open-Circuit Voltage (Voc): 22.5V
  • Short Circuit Voltage (Isc): 9.05A
  • Module Efficiency: 15.15%
  • Maximum System Voltage: 600 VDC
  • Weight: 25.5 lbs
  • Dimensions: 39.5 x 39.0 x 1.4 inches

100 Ah AGM Battery

  • Nominal Voltage: 12V
  • Nominal Capacity 77°F (25°C)
    • 20-hr (5.0A) 100 Ah
    • 10-hr (9.3A) 93 Ah
    • 5-hr (17.0A) 85 Ah
    • 1-hr (60.0A) 60 Ah
  • Approximate Weight 57.5 lbs
  • Internal Resistance ~5mΩ
  • Charge Shelf Life (% of normal charge capacity at 77°F (25°C)
    • 3 months 91%
    • 6 months 82%
    • 9 months 64%
  • Temperature Dependancy of Charge Capacity (20 hour rate)
    • 104° F (40°C) 102%
    • 77°F (25°C) 100%
    • 32°F (0°C) 85%
    • 5°F (-15°C) 65%
  • AGM Operational Temperature
  • Charge 32°F to 104° F (0° C to 40° C)
  • Discharge 5° F to 113° F (-15° C to 45° C)
  • AGM Storage Temperature 5°F to 104° F (-15° C to 40° C)
  • Charge Method (Constant Voltage)
  • Cycle Use (Repeating Use)
    • Initial Current 30 A or smaller
      • Control Voltage 14.6 – 14.8 V
    • Float Use
      • Control Voltage 13.6 – 13.8 V

40 amp MPPT Charge Controller

  • Maximum Power Point Tracking
  • Rated Charge Current: 40A
  • Rated Discharge Current: 40A
  • Nominal System Voltage: 12V/24V Auto
  • Battery Input Voltage Range: 8V~32V
  • Maximum PV Open Circuit Voltage: 92V
  • MPP Voltage Range: VBAT+2V~72V
  • Max. PV Input Power: 1040W/24V
  • Self-consumption: ≤16mA (24V)
  • Discharge Circuit Voltage Drop: ≤0.18V
  • Sealed Battery Voltage Parameters
  • Over Voltage Disconnect Voltage: 32V
  • Charging Limit Voltage: 30V
  • Over Voltage Reconnect Voltage: 30V
  • Equalize Charging Voltage 29.2V
  • Boost Charging Voltage: 28.8V
  • Float Charging Voltage: 27.6V
  • Boost Reconnect Charging Voltage: 26.4V
  • Low Voltage Reconnect Voltage: 25.2V
  • Under Voltage Warning Reconnect Voltage: 24.4V
  • Under Voltage Warning Voltage: 24.0V
  • Low Voltage Disconnect Voltage: 22.2V
  • Discharging Limit Voltage: 21.2V
  • Equalize Duration (min.): 120
  • Boost Duration (min.): 120
  • LCD Temperature Range: -20°C~+70°C
  • Working Environment Temperature Range -25°C~+45°C
  • Storage Temperature Range: -35°C~+80°C
  • Enclosure: IP30
  • Charging Mode: MPPT
  • Temperature Compensation: -3mV/°C/2V
  • Communication: RS485 (RJ45 interface)

Additional Information

Weight280 lbs
Dimensions37 × 24 × 24 in
invertor-type

number-of-batteries

number-of-panels

panel-size

Run Times

2.5 days

You may also like…